- Home
- Products
- Secondary Battery
- 25A-MGP Compact Guide Cylinder
Secondary Battery - 25A-MGP Compact Guide Cylinder
Series MGP is designed for high side load applications found in material handling, lifting and stopping. The 25A- series variations eliminates copper (Cu) and zinc (Zn) materials where possible, making it compatible with secondary battery manufacturing for electronics, automotive, and other vehicle types. The cylinder utilizes an ultra-compact design by incorporating the cylinder body as part of the guide body. As the stroke length increases, so does the bearing length, thus enhancing the cylinder's load bearing capacity.
25A-MGP, Compact Guide Cylinder
The MGP is a compact body actuator integrated with internal guide shafts to isolate the load bearing from the movement of the actuator's rod and seals. The carbon steel alloy slide bearing (Type M) provides lateral stability protecting it from side load impacts, suitable for stopping applications. The high precision ball bushing (Type L) allows for smooth operation that ensures stable travel resistance, suitable for pushing and lifting applications.
- Bore sizes (mm): 12, 16, 20, 25, 32, 40, 50, 63, 80, 100
- Non-rotating accuracy all bore sizes: +/-0.01° (Type A)
- Non-rotating accuracy 12 & 16mm bore: +/-0.07° (Type M) +/-0.05 (Type L)
- Non-rotating accuracy 20 & 25mm bore: +/-0.06° (Type M) +/-0.04 (Type L)
- Non-rotating accuracy 32 & 40mm bore: +/-0.05° (Type M) +/-0.03 (Type L)
- Non-rotating accuracy 50 & 63mm bore: +/-0.04° (Type M) +/-0.03 (Type L)
- Non-rotating accuracy 80 & 100mm bore: +/-0.03° (Type M) +/-0.03 (Type L)
- Rubber bumpers as standard
- Auto switch capable
- Material restriction: Copper and Zinc free
25A-MGP, Compact Guide Cylinder with Air Cushion
The MGP-AZ is a compact body actuator integrated with internal guide shafts to isolate the load bearing from the movement of the actuator's rod and seals. The air cushions allow the guided cylinder to absorb nearly three times as much kinetic energy as standard rubber bumpers while suppressing noise and vibration at the stroke end. The carbon steel alloy slide beaing (Type M) provides lateral stability protecting it from side load impacts, suitable for stopping applications. The high precision ball bushing (Type L) allows for smooth operation that ensures stable travel resistance, suitable for pushing and lifting applications.
- Bore sizes (mm): 16, 20, 25, 32, 40, 50, 63, 80, 100
- Non-rotating accuracy all bore sizes: +/-0.01° (Type A)
- Non-rotating accuracy 16mm bore: +/-0.07° (Type M) +/-0.05 (Type L)
- Non-rotating accuracy 20 & 25mm bore: +/-0.06° (Type M) +/-0.04 (Type L)
- Non-rotating accuracy 32 & 40mm bore: +/-0.05° (Type M) +/-0.03 (Type L)
- Non-rotating accuracy 50 & 63mm bore: +/-0.04° (Type M) +/-0.03 (Type L)
- Non-rotating accuracy 80 & 100mm bore: +/-0.03° (Type M) +/-0.03 (Type L)
- Air cushions standard
- Auto switch capable
- Material restriction: Copper and Zinc free
Products
- Actuators
- Directional Control Valves
- Airline Equipment
- Air Dryers & Main Line Filters
- Connectors
- Electric Actuators
- Vacuum Products
- Sensors & Switches
- Fluid Process
- Static Control
- Chillers
- Specialty Equipment
- Process Gas Equipment
- High Vacuum
- High Purity
-
Secondary Battery
- 25A-Copper and Zinc Free
- 25A-Pressure and Flow Sensors
- 25A-CQ2 Compact Cylinder
- 25A-MGP Compact Guide Cylinder
- 25A-MY1B Mechanically Jointed Rodless Cylinder
- 25A-MY1M Mechanically Jointed Rodless Cylinder - Slide Bearing
- 25A-MY1C Mechanically Jointed Rodless Cylinder - Cam Follower Guide
- 25A-MY1H Mechanically Jointed Rodless Cylinder - Linear Guide
- 25A-MY2H/HT Mechanically Jointed Rodless Cylinder - High Precision Guide
- 90-Copper, Zinc, and Nickel Free